German Third Reich Tinnie Pin Badges (1937-1942)

It is an gilt die struck brass with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is an white alloy with a press fitted spring pin. There are raised WILH. A. JÄGER FRANKFURT A.M. maker marks.

Here is a view of the back.

The condition is near excellent throughout.

This badge celebrates the 75th anniversary of the German Sängerbund.

It is an white alloy with brown enamel on the face with a press fitted spring pin. There are raised PAULMANN & CRONE LÜDENSCHEID maker marks.

Here is a view of the back.

The condition is near very good, with some wear to the enamel, as shown.

It is an die struck steel with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent, with some minor rusting on the back.

It is an die struck silver painted steel with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near good, with some spotting, as shown.

It is an die struck gilded brass with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near good, with some spotting, as shown.

It is a brown plastic with a heat applied spring pin. There is a rasied maker marks (it looks like BERHT in a triangle) on the back.

Here is a view of the back.

The condition is near excellent (almost mint) throughout.

It is an aluminum alloy with a press fitted spring pin. There are DESCHLER u. S MÜNCHEN 9 maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is an aluminum alloy with a press fitted spring pin. There are DESCHLER u. S MÜNCHEN 9 maker marks.

Here is a view of the back.

The condition is near very good throughout.

It is an copper alloy with a press fitted spring pin. There are no maker marks.

Here is a view of the back.

The condition is near very good, with minor wear and tarnish apparent throughout.

It is an copper alloy with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near very good, with minor wear and tarnish apparent throughout.

It is die-struck gilded brass with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is an aluminum alloy with a press fitted spring pin. There are L. CHR. LAUER NÜRNBERG-BERLIN maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck steel with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck steel with a clip applied spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck aluminum alloy with a press applied spring pin. There are L. CHR. LAUER NÜRNBERG-BERLIN maker marks on that back.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck aluminum alloy with a press applied spring pin. There are L. CHR. LAUER NÜRNBERG-BERLIN maker marks on that back.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck solid heavy alloy with a pad applied spring pin. There are L. CHR. LAUER NÜRNBERG-BERLIN maker marks on that back.

Here is a view of the back.

The condition is near very good throughout.

It is a die struck solid heavy alloy with a pad applied spring pin. There are raised "HA" maker marks on that back and H. AURICH DRESDEN

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck aluminum alloy with a press applied spring pin. There are RZM M9/3 LAUER NÜRNBERG maker marks on that back.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck steel with black painted face and a pad applied spring pin. There are no maker marks.

Here is a view of the back.

The condition is near good with scratches to the paint, as shown.

It is a die struck brass with soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near very good, as shown.

It is a die struck brass with soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near very good, as shown.

It is a die struck copper with soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent, as shown.

It is a cast gray plastic with a pad glued spring pin. There are Richard Sieper & Söhne Lüdenscheid maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a bright polished gilt die struck brass with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a bright polished die struck steel with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a gilt die struck alloy with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a gilt die struck brass with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a gilt die struck brass with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a wood button with an applied spring pin. There are raised AUGUSTIN HIEKE TYSSA and GES. GESCH  maker marks. It is numbered 71639.

This is a very rare button from a very minority political party at the time.

Here is a view of the back.

The condition is near excellent throughout.

It is an aluminum alloy gilded pin with a press applied spring pin. There are raised C. BAUMBERGER NÜRNBERG maker marks, with RZM and M9/12 maker marks.

Here is a view of the back.

The condition is near very good with slight wear to the coin and frame, as shown.

It is an aluminum alloy gilded pin with a press applied spring pin. There are raised C. BAUMBERGER NÜRNBERG maker marks, with RZM and M9/12 maker marks.

Here is a view of the back.

The condition is near very good with slight wear to the gilt, as shown.

It is a composite plastic button with a heat applied spring pin. There are raised RICHARD SIEPERS & SOHNE LUDENSCHEID maker marks, with RZM and M9/25 maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a solid heavy high relief badge with a press applied spring pin. There are raised G. BREHMER MARKNEUKIRCHEN maker marks, with RZM and M9/4 maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a brown pressed fiber with a pad applied spring pin. There are no maker marks.

Here is a view of the back.

The condition is near good, with moderate wear on the face.

It is a brown plastic with a heat applied spring pin. There are no maker marks.

Here is a view of the back.

The condition is near very good, with minor wear throughout.

It is a white plastic with a heat applied spring pin. There are raised RICHARD SIEPERS & SOHNE LUDENSCHEID maker marks, with RZM and M9/25 raised marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a cast aluminum with press fitted spring pin. There are ULBRIKT WIEN-KAUFING and M9/235 maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck steel with soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck steel with soldered spring pin. There are RZM 9/28 raised maker marks.

Here is a view of the back.

The condition is near excellent throughout.  There is some minor oxidation from age.

It is a die struck steel with soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a white cast alloy with a press fitted spring pin. There are C. POELLATH SCHROBENHAUSEN and 1939/40 raised maker marks and date on the back.

Here is a view of the back.

The condition is near excellent throughout.

It is a charcoal black composite resin with a space for a press fitted spring pin (the pin is missing, easily replaced). There no maker marks.

Here is a view of the back.

The condition is near excellent, excepting a missing pin.

It is a white cast alloy with a press fitted spring pin. There are GAU KOBLENZ-TRIER and design by the late (at the time) H. LERSCH maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a white cast alloy with a press fitted spring pin. There are M9/16 maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a white cast alloy with a press fitted spring pin. There are M9/162 maker marks.

Here is a view of the back.

The condition is near excellent throughout.