Imperial German Militaria

An Original and Authentic World War I German Flying Ace Manfred von Richthofen -- the Red Baron -- 10 Year Bronze KIA Plaque

This is an extremely rare bronze plaque commemorating the 10th year following the death in combat of the most famous ace of WWI. He was killed in aerial combat on 21 April 1918, with a record of 80 air victories.

This plaque is dated 1928, and it has the initials of the artist "FW" between the 19 and 28 of the date. There is a foundry mark "PH" in a triangle on the back. The plaque depicts the baron in his crushed hat, high collar flight jacket, and wearing the Pour Le Merite medal. Above his head is a stylized representation of a German fighter plane.

This plaque was specially commissioned by the family to memorialize his death. A very limited number were struck.

It measures 7 by 4-1/2 inches, and it has very high relief, especially noticeable from the back.

This is an interesting -- and very rare -- artifact that will make a welcome addition to your growing collection.

The condition is near excellent, with some signs of age and deep patina, as shown.

An Original and Authentic World War I German Flying Ace Manfred von Richthofen -- the Red Baron -- ART KRUPP Hallmarked Silver Gravy Boat

This is an extremely rare service piece from the estate of of the most famous ace of WWI. He was killed in aerial combat on 21 April 1918, with a record of 80 air victories.

This heavy gravy boat is a two piece construction with the pitcher portion attached to a silver oval tray by a nut as shown here. The "Art Krupp Berndorf Pr" silver proof mark is shown as well.

The tray measures 7 by 10-1/2 inches, and it is 7 inches high to the top of the handle. It has the von Richthofen baronial coat of arms on the side of the pitcher.

This is an interesting -- and very rare -- artifact that will make a welcome addition to your growing collection.

The condition is near excellent, with some signs of age and deep patina, as shown.

This is an early 20th Century Imperial German Crown Prince Rupert of Bavaria Sugar Bowl.

His full (English) title was HRH Rupprecht Maria Luitpold Ferdinand, Crown Prince of Bavaria, Duke of Bavaria, Franken and Swabia, Count Palatine of the Rhine.  In German it was Kronprinz Rupprecht von Bayern. He passed away in 1955, the last Crown Prince of Bavaria.

It has the imperial crown over the script letter "R" engraved monogram.

This is a very heavy silver plated covered sugar bowl. It has an impressed BERNDORF maker mark with ALPACCA silver content and 15 cl capacity on the bottom.

Here are views of the back and top with the cover removed.

The base measures 4-3/4 inches across the handles and 3-1/4 inches in diameter at the base. The overall height is 2 inches with the over on.

The condition is very good to near excellent, with some signs of freckles on the silver and heavy tarnish from age, as shown.

This is an early 20th Century Imperial German Kaiser Wilhelm II Fancy server.

His full name was Prince Frederick William Albert Victor of Prussia, in German: Prinz Friedrich Wilhelm Albert Viktor von Preußen.  His reign as King (Kaiser) was from 1888 to 1918.

It has the imperial crown over the letter "W" engraved monogram.

This is a very unusual design flat server. It has an impressed helm 800 and crescent moon and crown silver content mark.

Here is a view of the rear.

The base measures 9-1/4 inches long and 3-1/4 inches in diameter.

The condition is very good to near excellent, as shown.

This is an early 20th Century Imperial German Kaiser Wilhelm II Fancy spoon.

His full name was Prince Frederick William Albert Victor of Prussia, in German: Prinz Friedrich Wilhelm Albert Viktor von Preußen.  His reign as King (Kaiser) was from 1888 to 1918.

It has the imperial crown over the letter "W" engraved monogram.

This is a very unusual design very shallow bowl spoon. It has an impressed helm 800 and crescent moon and crown silver content mark.

Here is a view of the rear.

The spoon measures 5-3/8 inches long.

The condition is very good to near excellent, as shown.

This is an early 20th Century Imperial German Coat Of Arms Fancy Meat Fork

It has a complex knight and ducal engraved Coat Of Arms.

It has a winged wheel maker mark and 800 and crescent moon and crown silver content mark.

Here is a view of the rear.

The base measures 8-1/2 inches long.

The condition is very good to near excellent, as shown.

An Original and Authentic Pre-World War I Imperial German Regimental Service Stein

This is a large and ornate painted panels and detailed embellishments and slogans. It is named to a German reserve officer Rammel of the 12th Company Fusiliers of the 60th Infantry Regiment. identified here.

It measures 10-1/2 inches high by 4-1/4 inches wide at the base. Here is a view of the back side.

This is an interesting -- and scarce -- artifact that will make a welcome addition to your growing collection.

The condition is near excellent, with some signs of age and deep patina, as shown. There is the usual crazing of the glaze typical for these steins.

An Original and Authentic World War I German Naval Aviator Named Air Combat Victory Honor Cup

This is a large and ornate silver goblet, with grapes and leaves detailed embellishments. It is named to a German naval aviator Lt. zS. Schmidt. The date of the victory is 12.7.17 (12 July 1917). The front indicates it is for an aerial combat victory.

It measures 8-1/2 inches high by 3-3/4 inches wide at the mouth, and it has very high relief throughout. Here is a view of the back side.

This is an interesting -- and very rare -- artifact that will make a welcome addition to your growing collection.

The condition is near excellent, with some signs of age and deep patina, as shown.

An Original and Authentic World War I German Enlisted Aviator Named Air Combat Victory Honor Cup

This is a large and ornate silver goblet, with fluted and flared detailed embellishments. It is named to a German naval aviator Vizefeldwebel. Rosenfeld. This was Otto Rosenfeld's victory over a Sopwith Pup, his third of an eventual total of 13 before he was captured by the Allies.  This victory was over Etaine, France at 2050 on May 26, 1917 while Rosenfeld was assigned to Jasta 12.The reverse side has an engraved scrolled panel indicating the honor award.

It measures 12 inches high by 5 inches wide at the mouth, and it has very high relief throughout. Here is a view of the back side of the goblet.

This is an interesting -- and very rare -- artifact that will make a welcome addition to your growing collection.

The condition is near excellent, with some signs of age and deep patina, as shown.

An Original and Authentic World War I German Enlisted Aviator Named Air Combat Victory Honor Cup

This is a large and ornate silver goblet, with fluted and flared detailed embellishments. It is named to a German naval aviator Vizefeldwebel. Rosenfeld. This was Otto Rosenfeld's victory over a SPAD, his tenth of an eventual total of 13 before he was captured by the Allies.  This victory was on June 8, 1918 while Rosenfeld was assigned to Jasta 41.The reverse side has an engraved Iron Cross First Class of 1914 indicating the honor award.

It measures 10 inches high by 4 inches wide at the mouth, and it has very high relief throughout. Here is a view of the front side of the goblet. These are views from the top of the front and back.

This is an interesting -- and very rare -- artifact that will make a welcome addition to your growing collection.

The condition is near excellent, with some signs of age and deep patina, as shown.

There are a total of 20 medals (with two on one ribbon bar), with various imperial pieces dating from 1866 through WWI.

The condition varies from good to near excellent. This lot is priced to move.

This is a view of the back of the lot.

This is a very finely crafted Imperial German crown device with attachment pins.

It measures 31mm square. It is die struck and lead filled (to prevent crushing the high vaulted thin metal, and retain the pins) There are no maker or content marks.

The condition is near excellent.

This is a view of the back of the device.

This is a very finely crafted jeweler made Imperial German pilot's badge with crown device and brass flat pin.

It measures 45.5mm by 72.5. It is die struck and has a separately applied back. There is a German maker mark in the middle of the back under the pin.

This is the small knotted bow style.

This is a view of the back of the device.  This is a view with the pin up to show the maker mark.

The condition is near excellent, with very minor tarnish present.

This is a very finely crafted jeweler made Imperial German pilot's badge with crown device and silver flat pin.

It measures 45.5mm by 74.5. It is die struck and has a separately applied back. There is a German maker mark in the middle of the back under the pin and a touch mark at the upper left of the image of the back is also present.

This is an interesting variation, the most significant distinction being the larger more stylish bow at the bottom (making the badge longer) and the size and scale of the buildings and mountain background.

This is a view of the back of the device.  This is a view with the pin up to show the C. E. JUNCKER BERLIN SW68 maker mark.

The condition is near excellent, with very minor tarnish present.

This is a very finely crafted jeweler made two-piece (hollow) Imperial German gunner's badge with crown device and silver flat pin.

It measures 45.5mm by 74.5. It is die struck and has a separately applied back. There is a German maker mark in the middle of the back under the pin and a touch mark at the upper left of the image of the back is also present.

This is an interesting variation, the most significant distinction being the larger more stylish bow at the bottom, similar to the CEJ pilot badge above.

This is a view of the back of the device.

The condition is near excellent, with very minor tarnish present.

This is a very finely crafted silver plated Imperial German Army Observer's badge with crown device and silver flat pin.

It measures 45.5mm by 72.5. It is die struck, solid and has a separately applied slightly vaulted central enamel courier's flag device. There are no maker marks present.

This is the small knotted bow style.

This is a view of the back of the device.  This is a view with the pin up to show the attachment of the enamel device.

The condition is very good to near excellent, with moderate tarnish present.

This is a very finely crafted silver plated Imperial German Army Observer's badge with crown device and silver flat pin.

It measures 44mm by 71mm. It is die struck, solid and has a separately applied flat style central enamel courier's flag device. There are no maker marks present.

This is an interesting variation, the most significant distinction being the larger more stylish bow at the bottom and the flat soldered courier's flag device.

This is a view of the back of the device.

The condition is near excellent, with very minor tarnish present.

It has a B.B. & C maker mark on the back. The size is 57mm (2-1/4 inches).

The condition is near excellent, as shown.

This is a view of the back of the medal.

It has a faint stamped maker mark on the back. The size is 58mm (2-1/4 inches).

The condition is near excellent, as shown. There is no cracking to the enamel and the points of the star are not bent.

This is a view of the back of the medal.

It has no visible maker mark on the back. The size is 58mm (2-1/4 inches).

The condition is near fair, as shown. There is significant cracking to the enamel and signs of long and hard wear in combat.  There is deep tarnish throughout, and an number of scratches on the back and front.  It has a horizontal applied one-piece issue simple pin and hook closure.

This is a view of the back of the medal.

This medal was recovered by a GI from the burnt ruins of the Reichskanzlei in Berlin following the end of the war. The size is 57mm (2-1/4 inches).

The condition is RELIC, burnt and damaged, as shown. Traces of the original enamel and devices remain. The pin melted off.

This is a view of the back of the medal.

The size is 29mm (1-3/8 inches). The ribbon shows very slight wear from age.

The condition is near very good, as shown. There is minor wear to the gilt finish, evident in the images.

This is a view of the back of the medal.

The size is 29mm (1-3/8 inches).

The condition is near very good, as shown. There is very little wear to the gilt finish, evident in the images.

This is a view of the back of the medal.

This black and red/orange enamel on gilded brass medal is from the American Deutsche Kriegs Verein, an 1880s society for German war veterans living in America.  There were several thousand members in approximately 350 chapters, mostly in the urban areas. This is a fairly scarce medal, as the society fell into disfavor in the 1910s before and during WWI.

The size is 40mm (1-5/8 inches). It is plain on the back side, with no maker marks or identification.

The condition is near very good, as shown. There is some wear to the enamel finish, evident in the images.

Major Ludwig Adolf Wilhelm von Freiherr (1782-1834) was the founder of renowned corps of volunteers "Schwarze Schar" during the war of liberation in 1813.

The size is 34mm by 46mm (1-3/8 inches by 1-7/8). The ribbon shows some wear and tear from age.

The condition is near very good, as shown. There is minor wear to the silver, evident in the images.

This is a view of the back of the medal.

This medal was the Hessian equivalent of the Iron Cross, and only awarded to soldiers that were citizens. Approximately 150,000 were estimated to have been awarded.

The size is 33mm (1-3/8 inches). The ribbon is purple as it came to us. The correct ribbon should be orange and white. The medal shows minor wear and heavy tarnish from age.

The condition is near good, as shown.

This is a view of the back of the medal.

The size is 31mm (1-1/4 inches). There is no ribbon present. The medal shows moderate wear and heavy tarnish from age.

The condition is near good, as shown.

This is a view of the back of the medal.

The size is 17mm (5/8 inches). There is no ribbon present. The medal shows moderate wear and heavy tarnish from age.

The condition is near good, as shown.

This is a view of the back of the medal.

This is a very nicely jeweler made multi-piece medal with separately applied crown, swords, and disks, front and rear on the cross.  The case has a Deschler & Sohn München maker mark ribbon (torn as shown, but otherwise complete).  The case is properly marked to indicate the Crown. This is a view of the case and ribbon with the medal removed to show the construction.

The size is 43mm by 71mm (1-3/4 inches by 3-3/4 inches). The original ribbon is included.

The condition of the case is near very good, as shown. There is some wear, evident in the images.  The medal is in excellent condition with virtually all of the copper present and untarnished.

This is a view of the front and back of the medal

This is a nice made die-struck medal.

The size is 40mm (1-1/2 inches). There is no ribbon.

The condition is near excellent, as shown.

This is a view of the back of the medal.

This is a nice made multi-piece medal with separately applied swords, and disks, front and rear on the cross. This is especially visible from the side.

The size is 35mm by 51mm (1-3/4 inches by 2 inches). There is no ribbon.

The condition is near very good, as shown. There is some wear, evident in the images.

This is a view of the back of the medal.

This is a nice made one-piece medal. It has no ring or ribbon present.

The size is 36mm by 39mm (1-3/4 inches by 1-7/8 inches).

The condition is near excellent, as shown. There is some slight wear, evident in the images.

This is a view of the back of the medal.

World War I Weimar Veteran War Service 1914-1918 With Swords Medal

This is the Weimar German medal for the Kyffhauserbund veteran's association for WWI soldiers. The bronze medal measures 1-7/8 inches high and 1-1/4 inches wide.

The condition is fair to near good, with deep tarnish from age, and wear to the ribbon and swords device, as shown. There is some, evident in the images.

This is a view of the back of the medal.

This is a an early pre-WWII medal identified to Prussia for long service to the fire department. The obverse is enameled black, with fire helmet, and crossed axes in an oak leaf wreath. The reverse indicates it is for service in Prussia home defense fire brigade.

The size is 35mm by 32mm (1-3/4 inches by 1-1/2). There is no ribbon.

The condition is near excellent, as shown. This is a heavy silver plate on copper medal. There is some wear to the silver, exposing some copper at some of the high points, evident in the images.

This is a view of the back of the medal.

This is a die struck black painted brass badge. It is not maker marked.

The size is approximately 1-1/2 inches wide and 1-3/4 inches high.

The condition is very good to near excellent, excepting some routine wear to the paint from age, exposing some of the brass, as shown.

This is a view of the back of the badge.

This is a heavy die struck solid back insignia. It is not maker marked.

The size is approximately 44mm high by 21mm wide.

The condition is used, with some deep tarnish from age.

Front is shown at the left. The back has a spring pin closure.

This is a heavy die struck hollow back insignia. It is PAUL KUST BERLIN C.1 maker marked with registered markings on the back.

The size is approximately 38mm high by 30mm wide.

The condition is used, with some deep tarnish from age. The ribbon is a little frayed.

The back has a spring pin closure.

This is a heavy die struck solid back medal suspended from a die-struck hollow back pierced crown. It is not maker marked.

The size of the medal is approximately 40mm square.

The condition is used, with some deep tarnish from age. The ribbon is frayed and worn.

The back has a spring pin closure.

This is a heavy die struck solid bronze pin with black, white and red enamel. It is maker marked DESCHLER & S. MÜNCHEN in raised letters on the back.

The size of the pin is 30mm by 21mm.

The condition is used, with some deep tarnish from age.

The back has a spring pin closure.

This is an outstanding early sharpshooter's medal, exquisitely crafted. It will be a commanding centerpiece of any advanced shooting medal collection.

The condition is near excellent throughout. The medallion proper measure 1-3/4 by 2 inches high. The suspension is a simple textured split ring.

The back shows holes from the hollow construction.

This is a heavy silver mounted leather fob. There are a number of maker and content marks on the silver pieces, including an King's head, a script "R", a "3", and "875" silver content marks. The bottom shield is engraved with the intertwined letters "EK"

The size is approximately 6 inches high by 1-1/2 inches wide.

The condition is used, with some deep tarnish from age. The leather is a little dry.

The back is shown here.

This is a die struck tinnie featuring a horse and pennants with a tassel.

The size is approximately 2 inches high by 2 inches wide.

The condition is used, with some tarnish from age. The leather is a little dry.

The back is shown here.

World War I Imperial German IX Long Service Medal

The size is approximately 30mm in diameter.

The condition is used, the medal has some deep tarnish from age.

The back is visible here.

World War I 1914 Iron Cross Second Class Made into a fob.

This is a period made fob for a veteran of WWI. It is "M1" maker marked on the ring, just visible at the 2 o'clock position of the front view at the left.

The size is approximately 43mm square.

The condition is used, with some deep tarnish from age. The iron core shows significant rust.

The back is visible here.

We usually have a number of 1914 Iron Cross 2nd and 1st class medals available at any given time. At the moment, we have a KO ring marked IC 2nd, some unmarked, both with and without ribbons. Prices vary dependent on condition. Email us for price and availability.

This is a silver bullion shoulder board with an applied electric rail winged wheel device.

It measures 3-1/2 by 2 inches.

The condition is near very good, with some signs of age, tarnish on the silver and some moth bites on the wool.

This is a view of the back of the shoulder board.

We have several similar shoulder boards, with and without devices, in several colors. Email for current price and availability.

World War I WWI Imperial German Army Soldier Bronze Bust on Marble Base

This is a very heavy bronze on cast metal bust of a German Army soldier in an M1917 helmet. It has a raised artist or maker mark on the back.

Here are views of the right and left sides. This is a very finely detailed rendition.

The base measures 4-1/4 inches long and 4-1/4 inches wide. The overall height is 12 inches. It measures 5-1/2 inches across the shoulders at the widest point.

The condition is very good to near excellent, with some signs of freckles on the bronze and heavy tarnish from age, as shown.