German Youth Militaria

It has a separately applied HJ emblem on the bell. It has the original chained mouthpiece attached as shown.

The horn measures 11-3/4 by 4-1/8 inches across the bell.

The condition is near-excellent throughout, with a couple of minor dings.

The card has the various classes of shooting, with the scores entered in the appropriate place. The card has two Hitler postage stamps affixed, district and supervisor and instructor stamps and signatures, as shown.

Condition: Generally very good to near-excellent. Used.

This is a very well made multi-piece stained glass artwork. There is a red border surrounding a variegated blue field with a dagger thrust up through a swastika and rising sun emblem.

Size: 9-1/2-inches in diameter

Condition: near-excellent throughout.

The tag measures 1-1/2 by 4-1/2 inches.

The condition is near mint.

The tag measures 1-3/8 by 2-1/4 inches.

The condition is near very good, with staple holes, as shown.

This is a shot of the back. There are some faint maker marks on the pins.

The eagle measures 1-7/8 by 2 inches.

The condition is near excellent.

This is a shot of the back. There are no maker marks.

The eagle measures 3/4 inches (20mm).

The condition is near excellent.

The cord measures 12 inches when tightened as shown.

The condition is near excellent.

The stamp measures 2-1/4 wide by 2-1/2 inches high, as shown.

The rubber side is shown here.

This stamp was recycled, replacing an obsolete previous title. Traces of the original impression remain on the back side.

The condition is near excellent.

It is a gilt on a brass frame forming the letters of the BDM. There is a predominately green with thin red border district ribbon insert.

It has stamped RZM M1/15 maker marks and a deeply stamped number "60156"  It is 23mm by 14.5mm (7/8 by 1/2 inches).

Here is a view of the back.

The condition is near excellent.

This is a fairly scarce badge. It is a bronze alloy and assembled in three pieces.

It has raised FERD. WAGNER PFORZHEIM maker marks and a wide flat pin.  It is 49mm (1-7/8 inches) high.

Here is a view of the back and one with the pin up to show the raised maker marks.

The condition is near excellent, with minor signs of wear.

This is a very scarce badge. It is a die-struck steel emblem with banner and three hole drilled for mounting to the uniform.

It has no maker marks.  It is 80mm (3-1/8 inches) across.

Here is a view of the back.

The condition is near excellent, with minor signs of wear.

This is a very scarce badge. It is a gilt alloy.

It has raised RZM M1/101 maker marks and a deeply stamped letter "B"  It is 51mm (2 inches) high.

Here is a view of the back.

The condition is near excellent.

This is a very scarce badge. It is a silver plated alloy.

It has raised RZM M1/63 maker marks and a deeply stamped number "131191"  It is 51mm (2 inches) high.

Here is a view of the back.

The condition is near very good with minor wear to the silver plate.

This is a very scarce badge. It is a silver plated alloy.

It has raised RZM M1/34 maker marks and a deeply stamped number "38349"  It is 51mm (2 inches) high.

Here is a view of the back.

The condition is near very good with moderate wear to the silver plate.

This is a very scarce badge. It is a gilt alloy.

It has raised RZM M1/101 maker marks. It is 21mm (7/8 inches) high.

Here is a view of the back.

The condition is near excellent.

This is a very scarce badge. It is a gilt alloy.

It has raised RZM M1/101 maker marks. It is 21mm (7/8 inches) high.

Here is a view of the back.

The condition is near excellent.

This is a scarce badge. It is a white alloy.

It has stamped RZM M1/35 maker marks. It is 21mm (7/8 inches) high.

Here is a view of the back.

The condition is near excellent.

This is a scarce badge. It is a black enamel on white alloy.

It has raised RZM M1/101 maker marks. It is 21mm (7/8 inches) high.

Here is a view of the back.

The condition is near excellent.

This is the silver variant of this badge.

It has stamped RZM M1/120 maker mark on the back.

The condition is near excellent, with wear to the silver plate and deep tarnish from age. Here is a view of the back.

This is the silver variant of this badge.

It has stamped RZM M1/120 maker marks and a deeply stamped number 100595 on the back.

The condition is near excellent, with wear to the silver plate and deep tarnish from age. Here is a view of the back.

This is the silver variant of this badge.

It has stamped RZM M1/15 maker marks and a deeply stamped number 24913 on the back.

The condition is near excellent, with wear to the silver plate and deep tarnish from age. Here is a view of the back.

This is a very scarce badge. It is gilt on copper. It measures 18mm

It has no maker marks. Note the square swastika (not on point)

Here is a view of the back.

The condition is near very good, with wear apparent to the gilt finish.

This is a very scarce badge. It is gilt on copper. It measures 18mm

It has no maker marks. Note the square swastika (not on point)

Here is a view of the back.

The condition is near excellent, with very little wear to the original gilt finish.

This is a very scarce badge. It is a fluted die-struck brass. It measures 25mm (2 inches) in diameter.

It has no maker marks.

Here is a view of the back.

The condition is near very good, with wear apparent.

This is a matching pair of badges from the HJ/HL for the year 1933-34.

The stickpin is 5/8 inches in diameter, the pin badge is 7/8 inches in diameter. Both are marked GES. GESCH. on back of the stickpin and the badge in raised letters.

The condition is near-excellent throughout.

It is brass with white and black enamel and gilt border. It has raised RZM and GES. GESCH. and M1/70 maker marks on the back, as shown. It has a four digit stamped membership number. It has a pad applied spring pin closure.

Here is a view of the back.

The condition is near excellent, with some tarnish apparent on the back.

It is brass with white and black enamel and gilt border. It has raised RZM and GES. GESCH. and M1/70 maker marks on the back, as shown. It has a four digit stamped membership number 9207. It has a pad applied spring pin closure.

Here is a view of the back.

The condition is very good to near excellent, with moderate tarnish apparent on the front and back.

It is brass with white and black enamel and white alloy. It has strong raised RZM and M1-93 maker marks on the back, as shown. It has a pad applied spring pin closure.

Here is a view of the back.

The condition is very good to near excellent, with minor tarnish apparent on the front and back.

It is brass with white and black enamel and white alloy. It has very faint raised RZM and M1-141 maker marks on the back, as shown. It has a pad applied spring pin closure.

Here is a view of the back.

The condition is very good to near excellent, with minor tarnish apparent on the front and back.

It is brass with white and black enamel and white alloy. It has very faint raised RZM and M1-148 maker marks on the back, as shown. It has a pad applied spring pin closure.

Here is a view of the back.

The condition is very good to near excellent, with minor tarnish apparent on the front and back.

It is brass with white and black enamel and white alloy. It has very faint raised RZM and maker marks on the back, as shown. It has a pad applied spring pin closure.

Here is a view of the back.

The condition is very good to near excellent, with minor tarnish apparent on the front and back.

It is brass with white and black enamel and white alloy. It has raised RZM and M1/164 maker marks on the back, as shown. It has a pad applied spring pin closure.

Here is a view of the back.

The condition is very good to near excellent, with minor tarnish apparent on the front and back.

It is brass with white and black enamel and white alloy. It has raised RZM and 1/6 maker marks on the back, as shown. It has a two prong staple connection.

Here is a view of the back.

The condition is very good, with minor tarnish apparent  on the front and back. and some cracks to the enamel on the face.

It is brass with white and black enamel and copper alloy. It has no maker marks on the back. It has a two prong staple connection.

Here is a view of the back.

The condition is very good, with minor tarnish apparent  on the front and back. and some cracks to the enamel on the face.

It is white alloy with white and black paint. It has raised RZM and M1/146 maker marks on the back, as shown. It has a pad applied spring pin closure.

Here is a view of the back.

The condition is generally near excellent.

It is white alloy with white and black paint. It has raised RZM and M1/42 maker marks on the back, as shown. It has a pad applied spring pin closure.

Here is a view of the back.

The condition is generally very good to near excellent throughout.

It is white alloy with white and black paint. It has raised RZM and M1/103 maker marks on the back, as shown. It has a pad applied spring pin closure.

Here is a view of the back.

The condition is generally good, with oxidation apparent on the front and back, and chipping to the paint on the face.

It has no maker marks. It has a pad applied spring pin closure.

Here is a view of the back.

The condition is very good to near excellent.

It is brass with white and black enamel and gilt lettering. It has raised RZM and M1/63 maker marks on the back, as shown. It is slightly vaulted. It has a pad applied spring pin closure.

Here is a view of the back.

The condition is near excellent, with some tarnish apparent on the back.

It is brass with white and black enamel and gilt lettering. It has raised RZM and M1/123 maker marks on the back, as shown. It is slightly vaulted. It has a pad applied spring pin closure.

Here is a view of the back.

The condition is near excellent, with some tarnish apparent on the back.

It is white alloy with black enamel. It has raised RZM and M1/63 maker marks on the back, as shown. It is slightly vaulted. It has a simple pad applied spring pin.

Here is a view of the back.

The condition is very good to near excellent, with some enamel wear apparent and tarnish on both sides.

It is white alloy with black enamel. It has raised RZM and M1/14 maker marks on the back, as shown. It is slightly vaulted. It has a simple pad applied spring pin.

Here is a view of the back.

The condition is good to very good, with some enamel wear apparent and tarnish on both sides.

It is brass with black enamel. It has raised RZM and maker marks on the back, but they are partially covered by a resoldered pin, as shown. It is slightly vaulted.

Here is a view of the back.

The condition is fair, with significant enamel damage and pin repair, with wear apparent on both sides.

It is white alloy with black enamel. It has raised RZM and M1/123 maker marks on the back, as shown. It is slightly vaulted. It has a simple pad applied spring pin.  The enamel on this is exceptionally nice, rare in this badge.

Here is a view of the back.

The condition is near excellent, with some very minor tarnish on both sides.

It is brass alloy with red and black enamel. It has no readable maker marks on the back. It is very slightly vaulted. It has a simple soldiered pad applied spring pin.

Here is a view of the back.

The condition is good to very good, with some enamel wear apparent and tarnish on both sides.

It is a copper alloy with red and black enamel. It has stamped GES. GESCH maker marks on the pad. It is flat. It has a simple pad applied spring pin.

Note the smaller variation of the swastika in the rising sun and the translucent red baked enamel around the rays of this well-made pin.

Here is a view of the back.

The condition is good to very good, with some enamel wear apparent and tarnish on both sides.

It is white alloy with red and black enamel. It has no maker marks on the back. It is very slightly vaulted. It has a simple pad applied spring pin.

Note the thin variation of the swastika in the rising sun and the translucent red baked enamel around the rays of this well-made pin.

Here is a view of the back.

The condition is good to very good, with some enamel wear apparent and tarnish on both sides.

It is white alloy with red and black enamel. It has no maker marks on the back. It is very slightly vaulted. It has a simple pad applied spring pin.

Note the thin variation of the swastika in the rising sun and the translucent red baked enamel around the rays of this well-made pin.

Here is a view of the back.

The condition is very good, with almost no enamel wear apparent.

It is white alloy with red and black enamel. It has raised GES. GESCH maker marks on the back. It is very slightly vaulted. It has a simple pad applied spring pin.

Note the thicker variation of the swastika in the rising sun and lettering and the translucent red baked enamel around the rays of this well-made pin.

Here is a view of the back.

The condition is very good, with almost no enamel wear apparent.

It is white alloy with red and black enamel. It has raised GES. GESCH patent marks on the back, as shown. It is very slightly vaulted. It has a simple pad applied spring pin.

Here is a view of the back.

The condition is good to very good, with some enamel wear apparent and tarnish on both sides.

It is brass with red, white and black enamel and black lettering. It has "S" in a circle and GES. GESCH raised maker marks on the back, as shown.

Here is a view of the back.

The condition is near very good, with some tarnish apparent on both sides.

It is brass with red, white and black enamel and black lettering. It has a GES. GESCH raised maker mark on the back, as shown. It measures 20mm (3/4 inch) high.

Here is a view of the back.

The condition is near excellent throughout.

It is brass with white and blue enamel and gilt lettering. It has a DESCHLER & SOHN MÜNCHEN  raised maker mark on the back, as shown. It measures 25mm (1 inch) high.

Here is a view of the back.

The condition is near excellent throughout.

It is brass with white and blue enamel and gilt lettering. It has a DESCHLER & SOHN MÜNCHEN  stamped maker mark on the back, as shown. It measures 25mm (1 inch) high.

Here is a view of the back.

The condition is near excellent throughout.

It is white alloy metal with black enamel lettering. It has "ST&L.L." maker marks and GES. GESCH raised patent marks on the back, as shown. It has a simple spring pin closure.

Here is a view of the back.

The condition is near excellent.

It is copper colored aluminum alloy metal. It has "LEHMANN & WUNDENDER, HANNOVER" maker marks on the back, as shown. It has a press applied simple spring pin closure.

Here is a view of the back.

The condition is near excellent.

It is white resin plastic with black and gilt enamel. It has no maker marks. It has a simple string attachment.

Here is a view of the back.

The condition is near excellent.

This is a fairly scarce sleeve insignia, used before the armband replaced it. It is silver gray silk floss on black wool felt. It measures 2 by 3-1/4 inches.

Here is a view of the back.

The condition is near mint.

This is a fairly scarce set of gold silk floss on forest green cap insignia. It measures 1-7/8 by 1-1/2 inches.

Here is a view of the back.

The condition is near mint.

This organization was thought to be very pro-nationalistic toward France, which caused some issues with the German Youth organization and they distanced themselves from it fairly early in the war.

This is a fairly scarce sleeve insignia in mint condition. It is very well-constructed, BeVo woven red, white, sky blue, dark blue and gold silk floss machine woven on black silk. It measures 70mm by 90mm (2-3/4 by 3-1/2 inches) as shown.

Here is a view of the back.

The condition is near mint.

It is silver metal bullion wire woven on white black silk with a black floss swastika. It measures 2-3/4 inches wide by 2-3/4 inches high. It has GES. GESCH. marks.

Here is a view of the back.

The condition is unissued, and near excellent.

It is Bevo woven red, white and black silk floss woven on white silk. It measures 4-1/2 by 2-1/2 inches.

Here is a view of the back. It has woven GES. GESCH. markings.

The condition is near mint and untrimmed, as shown.

It is embroidered silver gray silk floss woven on black wool felt. It measures 2-1/4 inches in diameter.

Here is a view of the back. It is linen covered.

The condition is near mint, as shown.

It is embroidered silver bullion wire woven on black wool felt. It measures 2-1/8 inches in diameter.

Here is a view of the back.

The condition is near mint, as shown.

It is embroidered silver bullion wire woven on black wool felt. It measures 2-1/8 inches in diameter.

The page is pasted to a piece of an album page. It has tan linen backing.

The condition is near mint, as shown.

It is embroidered silver gray silk floss woven on black wool felt. It measures 2-3/8 inches in diameter.

Here is a view of the back.

The condition is near mint, as shown.

It is BeVo woven white silk floss woven on red silk. It measures 2 inches in diameter.

Here is a view of the back.

The condition is used, still near excellent, as shown.

It is BeVo woven white and red silk floss woven on tan silk. It measures 3 inches point to point.

Here is a view of the back.  Note there are remnants of the original RZM tag remaining.

The condition is used, still near excellent, as shown.

It is BeVo woven white and red silk floss woven on tan silk. It measures 3 inches point to point. The patch is complete and intact, it has some creases from folds that hide some detail, but no flaws.

Here is a view of the back.  Note there intact original RZM tag remaining.

The condition is used, still near excellent, as shown.

This is a view of the back.

The condition is near mint.

The condition is near mint.

The condition is near mint.

The condition is near mint.

This title is rarely seen full length.

The condition is near excellent, excepting some minor wear at the top edge.

It measures approximately 15-1/2 inches in circumference, as shown. It is sewn closed at the back and it was once on a uniform. There is an RZM maker tag present. This is a view of the back.

The condition is very good to near excellent, with some soil from age and long storage present.

It measures approximately 16 inches long, as shown. It is NOT sewn closed at the back, however it was once on a uniform. There is no maker tag present. This is a view of the back.

The condition is good to near very good, with some edge wear top and bottom.

It measures approximately 15 inches long, as shown. It was sewn closed at the back, and cut next to the seam. There is no maker tag present. This is a view of the front and back, unfolded.

The condition is very good to near excellent.

It measures approximately 15 inches long and 3-7/8, as shown. It was sewn closed at the back, and cut next to the seam. There is no maker tag present. This is a view of the back.

The condition is near excellent.

It measures approximately 16 inches in circumference and 3-7/8 wide, as shown. It was sewn closed at the back. There is no maker tag present. This is a view of the back and the inside.

The condition is very good to near excellent.

It measures approximately 12-1/2 inches in circumference, as shown. It is sewn closed at the back. There is no maker tag present. This is a view of the back.

The condition is good to near very good, with some signs of routine wear.

It measures approximately 3-3/4 inches wide by 1-3/4 inches high, as shown. It has an RZM maker tag on the back.

The condition is near excellent, as shown.

It measures approximately 3-3/4 inches wide by 1-3/4 inches high, as shown. It has an HJ RZM machine numbered maker tag on the back.

The condition is fair, near relic, with holes and wear, as shown.

It measures approximately 3-3/4 inches wide by 1-3/4 inches high, as shown. It has no maker tag on the back.

The condition is used, near excellent.

It measures approximately 3-3/4 inches wide by 1-3/4 inches high, as shown. It has no maker tag on the back.

The condition is used, near excellent with some fading from laundering, as shown.

It measures approximately 3-3/4 inches wide by 1-7/8 inches high, as shown. It has no maker tag on the back.

The condition is near excellent, as shown.

It measures approximately 4 inches wide by 2 inches high, as shown. It has no maker tag on the back.

The condition is near very good, as shown.

It measures approximately 4 inches wide by 2 inches high, as shown. It has no maker tag on the back.

The condition is near very good, as shown.

It measures approximately 4 inches wide by 2 inches high, as shown. It has an RZM maker tag on the back.

The condition is near excellent, as shown.

It measures approximately 4 inches wide by 2 inches high, as shown. It has an RZM maker tag on the back.

The condition is near excellent, as shown.

The condition is excellent to near mint.

The condition is excellent to near mint.

These are views from the side and bottom.

The condition is excellent to near mint.