German Flags, Banners, Poletops & Sashes

The sash is gold embossed with ADOLF HITLER on one side and gilt political eagle on the back side.

It measures 8 inches wide by 60 inches. The red material is very tight woven red silk, with a distinctive watering pattern. The heavy gold bullion fringe is 2 inches long, and present on both ends, front and rear.

Condition is generally near excellent overall, with some slight wear to the gilt lettering and tarnish to the tassels, as shown.

The sash is silver embossed with Die Gau-dienstelle der NSKOV on one side and silver Unserem Treuen Kameraden und Mitarbiter on the back side.

It measures 8 inches wide by 96 inches. The light red material is very tight woven silk, with a very distinctive watering pattern. The heavy gold bullion fringe is 3 inches long, and present on both ends, front and rear. There are an applied party device on the front and swastika on the back.

Condition is generally near excellent overall, with some slight wear to the silver lettering, as shown.

The sash is identified to the unit Radarbeitsdienst Abtlg. 2/295 Tittling. This group was located in Bayern-Ostmark Gau XXIX.

It measures 5-3/4 inches wide by 33 inches. The dark red material is woven silk, with a shiny satin finish on the front and matte finish on the back. There are silk-screen applied letters on the face.

Condition is generally near good overall, with some slight wear to the black lettering, as shown.

It measures 7-1/2 inches wide by 76 inches. The dark red material is woven silk, with a shiny satin finish on the front and matte finish on the back. This is an overall view of the front. There are applied swastika emblem and KCIC on the face.

There is a 2 inch silver bullion fringe on top and bottom.

Condition is generally near good overall, with some slight wear to the sash, as shown.

The sash is identified to the DEUTSCHES GENERALKONSOLAT -- SHANGHAI in black letters on red orange heavy raw silk.

It measures 5 inches wide by 72 inches.

Condition is generally near good overall, with some slight wear, as shown.

It measures 6 inches wide by 33 inches.

Condition is generally near good overall, with some fading from exposure to the sun from long display in a memorial case, as shown.

This flag was in use from 1903 to 1919, when it was abolished.

Condition is generally very good to near excellent overall, with the exception of some pulls in the hoist side (which will not show when properly attached to a staff)

It measures 30 by 48 inches. The material is tight woven wool. The flag is reinforced with six rows of stitching top and bottom, seven rows of stitching on the fly side, and a gusset on the hoist side. There are no grommets, the flag intended for attachment to a staff.

This flag was in use from 1903 to 1919, when it was abolished.

Condition is generally very good overall, with the exception of some tiny holes in the wool from age and being flown.

It measures 58 by 94 inches. The material is medium density woven wool. The flag is reinforced with six rows of stitching top and bottom, seven rows of stitching on the fly side, and a gusset for a rope on the hoist side. There are no grommets, the flag intended for attachment to a staff.  The rope is no longer present.

This flag was in use from 1903 to 1919, when it was abolished.

Condition is generally very good overall, with the exception of some minor stains from age and display.

It measures 30 by 48 inches, the "tails" add an additional 7 inches with three 5-inch red and black wool tassels. The material is medium density cotton. There is a gusset for a rope on the hoist side. There are no grommets, the flag intended for attachment to a staff.

This flag was in use during the early 1930s.

Condition is generally very good overall, with the exception of some slight wear and tear on the the hoist side, a minor hole on the fly side, and some pin holes in the body of the wool.

There is a Bonner Fahnenfabrik Bonn a. Rhein maker marked label applied on the hoist reinforcement.  There is a single white composite material ring remaining on the hoist. This is a view of the reverse side.

It measures 28 by 34 inches. The material is medium weight woven wool. The flag is reinforced with double rows of stitching on the fly and the hoist side. There are no grommets, the flag intended for attachment to a staff.

The standarte measures 24 by 26 inches with 1-1/2 inch fringe on three sides and a Naugahyde pleather top. It has silver bullion wire trim and very shiny finish.

It has a heavy embroidered unit identification on both sides. This is close-up detail of the embroidery and swastika. The multi-piece swastika and circle are separately applied on both sides.

Condition is generally near excellent overall.

This is a nice, detailed, well-constructed standarte, available at a fraction of the cost of an original.

Condition is generally excellent to near mint overall, with the exception of a 2 inch hole at the upper fly side. The sewn-in hoist lanyard is complete, intact and uncut.

It has no maker mark or size stamp.

Condition is generally good to near very good overall, with the exception of some tearing at the top of the gusset at the hoist side and about 10 small holes (none larger than 1/2 inch) in various places on the flag. This is an overall view.

It has no maker marks, as shown in the close-up images.

Condition is generally very good to near excellent overall and it has the Westdeutsche Fahnen-Fabrik BONN maker mark on the hoist, as shown in the close-up images.

The fly side has reinforcements at the corners, showing some neat repairs. Other repairs and some small black stains can be seen here.  There swastika is very large, shown here in comparison to a 12-inch ruler.

The flag measures 7 by 12.5 feet (about 2.1m by 3.2m)

Condition is generally very good to near excellent overall and it has the penned mark on the hoist, as shown.

The fly side has reinforcements at the corners, the center showing some minor stains. Other detail can be seen here.  There swastika and gear DAF emblem is very large.

The flag measures approximately 11 by 13 feet.

ABSV Hofstede-Riemke is a shooting sports association that has been in existence since 1913.  It is still very active today and has about 500 members. 

This flag dates to the 1930s and was used by the 2nd (of 6) companies.  This is a VERY rare flag.

Condition is generally very good to near excellent overall and it has seven rings on the hoist for attachment to a standard, as shown in the overall images.

The flag is trimmed in heavy silver bullion fringe on three sides. The front can be seen here and the back is shown here.  It is completely two-sided and was intended for parade use.

This is a small-sized flag with a 20 inch central disk used to identify a unit on the ground to aircraft above.  It is one-sided and has tie down grommets on all four corners

This banner has been used and has several shrapnel hits (the largest about 2 inches in diameter at the 10 O'clock position on the image) and some stains from use present.

Condition is generally good to very good overall.

The back is plain and has no emblem.

This is a medium-sized flag with a 30 inch central disk used to identify a unit on the ground to aircraft above.  It is one-sided and has tie down grommets on all four corners

This banner has been used

Condition is generally near excellent. There are some minor stains present.

The back is plain and has no emblem.

This is a medium-sized flag with a 12-1/2 inch separately applied central disk.  It is two-sided and has a gusset for attachment to a staff

This flag has been used

Condition is generally near excellent. There are some minor stains present.

The back has another separately applied emblem.

This is a medium-sized flag with an 18 inch separately applied central disk.  It is two-sided and has a gusset for attachment to a staff

This flag has been used

Condition is generally near excellent. There are some minor stains present.

The back has another separately applied emblem.

This is a very large flag with a 27 inch central disk. 

This flag has been used and has some minor stains and signs of use present.

Condition is generally very good overall and it has a gusset for attachment to a staff.

The back has another separately applied silk-screened emblem, as is shown here.

This is a very large flag with a 28 inch central disk. 

This flag has been used and has some minor stains and signs of use present. The mottled appearance is from shadows and are not stains.

Condition is generally very good overall and it has a gusset for attachment to a staff.

The back has another separately applied silk-screened emblem.

This is a very large banner with a 44 inch central disk used to identify a unit on the ground to aircraft above. 

This banner has been used and has several repairs and some stains present.

Condition is generally good to very good overall and it has two brass grommets on the gusset for attachment.

The back is plain and has no emblem, as is shown here.

This was made for an Axis Powers solidarity rally.

The flags are attached to the original cord. They are independent pieces, the image shows them together to allow more detail in the photo.

Condition is generally near excellent overall, as shown.

This was made in Italy to commemorate the May 1938 meeting between Hitler and Mussolini in Rome, just prior to the annexation of Austria.

Condition is generally near excellent overall, as shown. The back side is shown here.

This flag was used as a warning for slippery or glare (smooth) ice. It is silkscreened blue letters on mustard yellow cotton.

This is a view of the back.

Condition is generally very good overall, with the usual signs of use, minor holes and weathering.

The flag measures 9 by 11 inches.

This flag is made from 15 separate pieces of red, white and blue linen.

This is a view of the back.

Condition is generally very good to near excellent overall.

The flag measures 12-1/2 by 19 inches.

This is a cutout single piece swastika in circle poletop, probably for a vehicle flag.

Condition is generally good, however, it is broken at the base and no longer has a mounting. There are the usual signs of use. There is some slight freckling and spotting to the plate.

The poletop measures 3 inches wide by 2-1/2 inches high.

Here is a view of the back.

This is a heavy plated swastika and mount for a vehicle. This is a scarce and difficult to find item.

Condition is generally near excellent overall, with the usual signs of use. There is some slight pitting from exposure to the road and weather. The original attachment clip and tension nut and bolt are present.

The device measures 4 inches high and 2 inches across the flats of the swastika.

Here is a view of the back.

This is a coarse woven wool, double stitched on the seams and reinforced on the hoist for use on a cavalry war lance.  The pattern is silk screen printed on one side

Condition is generally fair to good overall, with some significant holes and signs of long use. There is some soil from exposure to the weather.

The flag measures 7-1/2 inches high on the hoist by 11 inches on the fly.  Here is a view of the back.

This is a TWO piece heavy weight cotton twill with heavily embroidered Luftwaffe eagles on both sides, to present a finished appearance on each side.  This pennant is on TWO pieces of taupe colored herringbone twill.

Condition is generally very good. with the border edge piping and hoist missing.

The flag measures 7-1/4 inches high on the hoist by 12 inches on the fly.

This is a TWO sided heavy weight cotton twill with heavily embroidered Army eagles on both sides, to present a finished appearance on each side.  This pennant is on TWO pieces of field gray/green colored twill with heavy cord piping border.

Condition is generally very good. with the border edge and hoist missing.

The flag measures 8-1/2 inches high on the hoist by 14 inches on the fly.

This is a heavy weight cotton twill, double stitched on the seams and reinforced on the hoist for use on a car fender staff.

Condition is generally very good to near excellent overall, with the usual signs of use. There is some soil from exposure to the weather. It has very minor fraying present at the tip. The original attachment clip and eye and wire stiffener are present.

The flag measures 7-1/2 inches high on the hoist by 13 inches on the fly. It has two separately applied silk screen black, red and white panels sewn back to back to present the eagle and letters in the correct orientation on both sides. Here is a view of the back.

This is a medium weave wool, double stitched on the seams and reinforced on the hoist for use on a small craft.

Condition is generally very good, with the usual signs of use. There is some soil from exposure to the weather. It has some minor fraying and holes present. The original attachment lanyard is present. There is a maker mark tag on the hoist.

The flag measures 11 inches high on the hoist by 20 inches on the fly. It has two silk screen black, yellow, and red on off white wool. Here is a view of the back.

This is a heavy weight woven wool with cotton twill stiffener, single stitched and white piped on the seams.

Condition is generally good overall, with the usual signs of use and some holes from moth bites. There is some soil from exposure to the weather. The original cord lanyard tie and clip are present.

The flag measures 8 inches high on the hoist by 12 inches on the fly. It has two separately applied silk screen black and silver gray DK emblems sewn back to back to present the emblem and letters in the correct orientation on both sides. Here is a view of the back.

This is a heavy weight tight woven linen twill, single stitched on the seams and reinforced on the hoist for use on a car fender staff.

It is made in four pieces: two red triangles, each with the swastika embroidered to separately applied white linen disks to present the correct orientation from each side. There is a heavy gusset reinforcement.

Condition is generally very good to near excellent overall, with the usual signs of use and some staining present. There is some soil from exposure to the weather. It has no tattering or fraying present. The original cord is not present.

The flag measures 10 inches high on the hoist by 13-1/2 inches on the fly. Here is a view of the left side.

This is a medium-heavy weight linen twill, single stitched on the seams and reinforced on the hoist for use on a car fender staff.

It is made in four pieces: two red triangles, each with the swastika separately applied to present the correct orientation from each side.

Condition is generally very good to near excellent overall, with the usual signs of use. There is some soil from exposure to the weather. It has no tattering or fraying present. The original cord is present.

The flag measures 11 inches high on the hoist by 16-1/2 inches on the fly. Here is a view of the back.

This is a medium-heavy weight linen twill, single stitched on the seams and with rings mounted on the hoist for use on a car fender staff.

It is made in four pieces: two red triangles, each with the embroidered swastika disks separately applied to present the correct orientation from each side.

Condition is generally very good to near excellent overall, with the usual signs of use. There is some moderate soil from exposure to the weather. It has no tattering or fraying present.

The flag measures 5-1/2 inches high on the hoist by 8-1/2 inches on the fly. Here is a view of the back.

This is a light weight cotton twill, single stitched folded over seams and with folded over gusset on the hoist for use on a car fender staff.

It is made in three pieces: two silk-screened swastika disks separately applied to a single layer flag to present the correct orientation from each side.

Condition is generally near excellent overall, with the minor signs of very occasional use. There is some slight soil from exposure to the weather. It has no tattering or fraying present.

The flag measures 9 inches high on the hoist by 17 inches on the fly.

This is a very well made multi-piece banner featuring some dense embroidery on one side and the national colors and youth swastika on the other. There is a heavy doubled fringe border surrounding the three free sides and three loops for suspension.

It is identified to Süd Schwaben and has the HJ Blut und Ehre motto worked into the design.

It measures 16 inches square.

Condition: near-excellent throughout.

This is a very well made multi-piece flag featuring the youth swastika applied on both sides. This is a view of the back. There is a heavy central emblem with separately applied swastikas.  There is one (of an original two) brass clip at the top (the bottom one is missing) and two loops for standard staff suspension.

It measures 38 by 58 inches. There are no maker marks.

Condition: near-excellent, with some minor soil from use.

This is a single piece lightweight wool flag featuring the youth single lightning bolt silk screen applied. This is a view of the back. There is sewn in cord with no clip at the hoist. It has white thread finished edges.

It measures 6-1/2 by 10-1/2 inches. There are no maker marks.

It is in near-very good condition, with some minor holes and wear from age.