German Wound Badges

It is a die struck black enameled badge with a light round pin closure, and the helmet in very high relief.

Here is a view of the back with the pin down. There are no maker marks.

The condition is near excellent, with very slight signs of minor wear to the black enamel on brass present and some slight bending, as shown.  There is a tiny chip on the paint on the helmet, visible in the image.

It is a die struck silver plate badge with a heavy round pin closure, and the helmet in very high relief.

Here is a view of the back with the pin down. There are no maker marks apparent.

The condition is very good near excellent, with signs of minor wear and tarnish to the silver plate present, as shown.

It is a die struck black paint on brass badge with a light round pin closure, and the helmet and swastika in very  high relief.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of overall wear to the paint present, as shown.

It is a die struck black paint on brass badge with a light round pin closure, and the helmet and swastika in very  high relief.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of overall wear to the paint present, as shown.  There is some rusting on the back.

It is a die struck black paint on brass badge with a light round pin closure, and the helmet in high relief.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of minor wear to the paint present, as shown.

It is a deep yellow gold with raised 65 maker mark. This is a view of the front, out of the box and a view of the back showing the round pin down. There is very minor wear of the finish on front and rear from routine use.

This is a view of the top and bottom of the case. Note the Vienna (Wien) maker tag is still attached. There is only very slight wear to the purple finish, as shown.

The condition is near excellent, as shown.

It is a deep matte gold with raised 30 maker mark. This is a view of the front, out of the box and a view of the back showing the round pin up. There is very minor wear of the finish on front and rear from routine use.

This is a view of the top and bottom and inside of the case. Note the Vienna (Wien III) maker tag is still attached. There is only very slight wear to the purple finish, as shown.

The condition is near excellent, as shown.

It is a deep bright gold with raised 30 maker mark. This is a view of the front, out of the box and a view of the back showing the flat pin up. There is very minor wear of the finish on front and rear from routine use.

This is a view of the top and bottom and inside of the case. Note the Vienna (Wien III) maker tag is still attached. There is only very slight wear to the purple finish, as shown.

The condition is near excellent, as shown.

It is a bright gold with "65" maker mark on the back. It has a round needle shaped pin and square-shaped hook catch.

The condition is near excellent, with minor wear to the back, as shown.

It is a bright gold solid back badge with "107" raised maker mark. This is a view of the back with the broad pin up to show the maker mark.

Here is a view of the back with the pin down.

This is a view of the medal in the box.  This is the top of the case, showing one side of the top lid missing.  The condition of the case is fair to good, as shown.

The condition is near very good, with some signs of routine wear to the gilt, and some tarnish present as shown.  The name (initials?) BEI are scratched in the back.

It is a solid back badge. It appears to be coin silver with no maker or content marks.

Here are close-up views of the front and the back with the round pin down.  This is the top of the cardboard case.

The condition is near excellent, with some signs of deep tarnish to the silver.

The case shows some wear and splitting at the seams on the lid.

It is a solid back badge, silver plated with no maker marks.

Here are close-up views of the front and the back with the flat pin down.  This is the top of the cardboard case.

The condition is very good to near excellent, with some signs of minor wear to the silver.

It is a solid back badge, silver plated with raised "30" maker marks.

Here is a view of the back with the flat pin down.

The condition is very good to near excellent, with some signs of minor wear to the silver.

It is a solid back badge, silver plated with no maker marks.

Here is a view of the back with the flat pin down.

The condition is very good to near excellent, with some signs of minor wear to the silver.

It is a die-struck hollow enameled badge with no maker marks. This is a very minty badge with some very minor wear to the very edges of the swastika.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of very minor wear to the paint, as shown.

It is a die-struck hollow enameled badge with no maker marks. This is a very minty badge with some very minor wear to the back edges and the very edges of the swastika.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of minor wear to the paint, and some tarnish present as shown.

It is a die-struck hollow enameled badge with no maker marks. This is a very salty badge with wear to the back edges and front paint. There is some light rust freckling present.

Here is a view of the back with the pin down.

The condition is near very good, with wear to the paint, and some rust on the back present as shown.

We have several of the black wound badges in similar (used) condition. Including examples in brass, steel, both with and without maker marks.

It is a die-struck hollow enameled brass badge with no maker marks. This is a very salty badge with wear to the back edges and front paint. There is some moderate rust freckling present.

Here is a view of the back with the pin down and one with the pin up.

The condition is near very good, with wear to the paint, and some rust on the back present as shown.

It is a die-struck hollow enameled steel badge with no maker marks. This is a very salty badge with wear to the back edges and front paint. There is some moderate rust freckling present.

Here is a view of the back.

The condition is near very good, with wear to the paint, and some rust on the back present as shown.

It is a die-struck hollow enameled steel badge with no maker marks. This is a mint condition badge with virtually no signs of wear to the original matte black paint.

Here is a view of the back.

The condition is near mint as shown.