German Military Badges

This is an extremely rare badge. It has an impressed RZM maker mark.

Here is a view of the back.

It measures 54mm

The condition is near excellent, with some minor wear and darkness from tarnish throughout.

This is an extremely rare badge. It is 800 coin silver with a square maker marks resembling a nested LN in raised letters.  It also has stamped GES. GESCH. and 800 content marks.

Here is a view of the back.

It measures 48mm

The condition is near excellent, with some minor wear and darkness from tarnish throughout.

(This is the same badge shown on the Sports Badges page.  We only have the one badge.  It is shown here for convenience.)

This is an extremely rare badge. It is dark oxidized silver with no maker marks.

Here is a view of the back.

The condition is very good to near excellent throughout.

This is a scarce badge. It is bronze with no maker marks. This is the "two hole" variant of this badge. It has a flat pin and simple hook attachment.

Here is a view of the back with the pin down and another with the pin up.

The condition is near excellent, with some signs of tarnish from age.

This is a very hard to find badge in any condition. It has no maker mark. It measures 15/16 inches square.

Here is a view of the back.

The condition is near excellent, with some signs of minor wear.

This is a very scarce badge in any condition. It has no maker marks. It measures 2-1/2 by 1-5/8 inches wide. It has the usual wide pin and simple hook closure.

Here is a view of the back.

The condition is near very good, with some moderate signs of wear.

This is an extremely RARE badge. It is an unmarked 800 silver content coin silver with a GES. GESCH. 22639 maker mark.

This is a very scarce badge in any condition. It has no maker marks. It measures 2-3/8 by 2 inches wide. It has round horizontal pin and simple hook closure.

Here is a view of the back.

The condition is near excellent, with some moderate signs of tarnish and wear.

This is a hard to find badge. It is gilded gold with A.G.M u. K. GABLONZ maker marks and the PEEKHAUS design marks in large raised letters. This is a view of the back with the pin up to show all the maker marks.

Here is a view of the back with the pin down.

The condition is excellent, with virtually no signs of  wear to the gilt.

This is a hard to find badge. It is gilded gold with A.G.M u. K. GABLONZ maker marks and the PEEKHAUS design marks in large raised letters. This is a view of the back with the pin up to show all the maker marks.

Here is a view of the back with the pin down.

The condition is excellent, with very minor signs of  wear to the gilt.

This is a hard to find badge. It is gilded gold with NO maker marks apparent. This is a view of the back with the pin up.

Here is a view of the back with the pin down.

The condition is excellent, with very minor signs of  wear to the gilt.

It is a white alloy, with crossed Russian Cossack swords and wreath design with "FRONTE RUSSO" in Italian on a banner across the bottom.

Here is a view of the back. It has a lot of raised maker marks typical of Italian badges. It was made by LORIOLI of Milano, the same firm that made the German Italian campaign medals. This is the same badge that is also shown on the Italian militaria page.

The condition is near very good, with some oxidation from age and signs of long-time wear. The original pin is detached from the badge, but it is included.

This is an extremely rare badge in the hinged hard case.

Here is a view of the front and back of the badge with the pin down. The badge is VERY slightly vaulted.  It is a white metal alloy eagle with brass gilded wreath and small rivets.

These are views of the case open, top and bottom.

The condition is near excellent, with some signs of minor wear.

This is an scarce badge.

Here is a view of the back with the pin down and one with the pin up. The badge is VERY slightly vaulted. There are no maker marks.

The condition is near excellent, with some signs of minor wear.

This badge has no maker marks. It shows signs of routine wear.

Here is a view of the back with the pin down. The badge is flat.

The condition is near excellent, with some signs of minor wear, and some tarnish present as shown.

This badge has no maker marks and it is flat

Here is a view of the back with the pin down. The badge is flat and a deep red-bronze color.

The condition is near excellent, with slight signs of minor wear, and some tarnish present as shown.

This badge has no maker marks. It shows signs of routine wear.

Here is a view of the back with the pin down. The badge is slightly vaulted.

The condition is near excellent, with some signs of minor wear, and some tarnish present as shown.

This badge has no maker marks. It shows signs of routine wear.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of minor wear, and some tarnish present as shown.

This badge has no maker marks. It shows signs of routine wear.

Here is a view of the back with the pin down. The badge is round.

The condition is near excellent, with some signs of minor wear, and some tarnish present as shown.

This very sharp die-struck hollow badge has no maker marks. It shows signs of routine wear.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of minor wear, and some tarnish present as shown.

It does not get any more MINT condition than this!

This die struck badge has a stamped GWL maker mark. It shows absolutely no sign of wear. This is the top of the box identifying the contents.  There is some minor rust on the steel staples that does not detract.

Here is a view of the back with the pin down. The badge is slightly vaulted.

The condition is absolutely MINT, as shown.

This die struck badge has no maker marks. It shows signs of very light wear.

Here is a view of the back with the pin down. The badge has an integral hook catch for the simple hinged needle pin.

The condition is near excellent, with some signs of minor wear, as shown.

This die struck badge has stamped GWL stamped maker mark. It shows signs of very light wear.

Here is a view of the back with the pin down. The badge has an integral hook catch for the simple hinged needle pin.

The condition is near excellent, with some signs of minor wear, as shown.

This die struck badge has stamped GWL stamped maker mark. It shows signs of very light wear.

Here is a view of the back with the pin down. The badge has an pad applied hook catch for the t-bar style hinged needle pin.

The condition is near excellent, with some signs of minor wear, as shown.

This die struck badge has no maker marks. It shows signs of very light wear.

Here is a view of the back with the pin down. The badge is slightly vaulted.

The condition is near excellent, with some signs of minor wear, as shown.

This die struck badge has no maker marks. It shows signs of very light wear.

Here is a view of the back with the pin down. The badge is slightly vaulted.

The condition is near excellent, with some signs of minor wear, as shown.

This die struck badge has no maker marks. It shows signs of minor to moderate wear to the silver plate.

Here is a view of the back with the pin down. The badge is slightly vaulted.

The condition is near excellent, with some signs of moderate wear, as shown.

This shallow vaulted die-struck hollowback badge has no maker mark. It shows some minor signs of wear.

Here is a view of the back with the pin down.

The condition is very good to near excellent, with some wear, as shown.

This is a VERY scarce badge.

This two-piece deep vaulted badge has a raised G.B. maker mark on the separately applied tank. The number plate is also separately applied. The badge shows signs of routine wear.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of minor wear, and some tarnish present as shown.

This deep vaulted badge has raised "FLL" in three circles and a raised "43" maker marks. It shows signs of routine wear.

Here is a view of the back with the pin down and one with the pin up.

The condition is near excellent, with some signs of minor wear, and very minor tarnish present as shown.

It shows very little signs of wear to the silver plate.

Here are views of the solid back with the pin down and pin up showing the raised IA stylized maker marks

The condition is near excellent, with almost no signs of wear, as shown.

This is a very rare solid flat badge has a raised Assmann "A" maker mark. It shows almost no signs of wear.

Here is a view of the back showing the large screwback fastener in place and one with the back removed to show the maker mark.

The condition is near excellent, as shown.

Here is a view of the back with the pin down. This is a shot of the raised "RK" maker mark.

The condition is near very good, with signs of moderate to heavy wear the silver finish on the wreath, as shown.

Here is a view of the back with the pin down. This is a shot of the raised "RK" maker mark.

The condition is near very good, with signs of slight to moderate wear to the silver finish on the wreath, as shown.

Here is a view of the back with the pin down. This is a shot of the raised "JFS" maker mark.

The condition is near very good, with noticeable signs of moderate to heavy wear to the gilt finish, as shown.

Here is a view of the back with the pin down. This is a shot of the raised "JFS" maker mark.

The condition is near excellent, with only the slightest signs of wear to the gilt finish, as shown.

This two-piece badge has a separately applied winged bomb. It has an R. S. & S. raised maker mark under the pin at the hinge. It shows minor signs of wear.

Here is a view of the back with the pin down.

The condition is near excellent, as shown.

This two-piece badge has a separately applied winged arrow. It has a G. H. OSANG DRESEN stamped maker mark near the hinge of the wide flat pin. It shows minor signs of wear.

Here is a view of the back with the pin down.

The condition is near excellent, as shown.

This two-piece badge has a separately applied winged arrow. It has no maker mark. It shows virtually no wear.

Here is a view of the back with the pin down.

The condition is near excellent, as shown.

This two-piece badge has a separately applied winged arrow. It has no maker mark. It shows virtually no wear.

Here is a view of the back with the pin down and one with the pin up.

The condition is near excellent, as shown.

This two-piece badge has a separately applied black falcon head. It has a stamped G.H.OSANG DRESDEN maker mark near the hinge. It shows minor signs of  wear and some slight tarnish.

Here is a view of the back with the pin down.

The condition is near excellent, as shown.

This two-piece badge has a separately applied black falcon head. It has no maker marks. It shows minor signs of  wear and some slight tarnish.

Here is a view of the back with the pin down and with the pin up.

The condition is near excellent, as shown.

This is a very lightweight aluminum alloy vaulted two piece badge with the applied eagle has a C. E. JUNCKER BERLIN SW maker mark. It shows virtually no wear.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of minor wear, as shown.

This vaulted two piece badge with the applied eagle has a C. E. JUNCKER BERLIN SW maker mark. It shows signs of very light wear.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of minor wear, as shown.

This vaulted two piece badge with the applied eagle has a W. DEUMER LÜDENSCHEID maker mark. It shows signs of very light wear. This has a variant eagle. Note the position of the head and claws and the relative size of the swastika.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of minor wear, as shown.

This vaulted two piece badge with the applied eagle has a JMME maker mark. It shows signs of very light wear.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of minor wear, as shown.

This vaulted two piece badge with the applied eagle has a JMME maker mark. It shows signs of very light wear.

Here is a view of the back with the pin down.

The condition is very good to near excellent, with some signs of moderate tarnish and wear (mostly to the back), as shown.

This vaulted two piece badge with the applied eagle has a BSW in a clover leaf maker mark. It shows signs of very light wear.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of minor wear, as shown.

This one piece badge with the gray painted cloud and black lightning bolt has no maker mark. It shows signs of very light wear.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of minor wear, and some tarnish present as shown.